メインコンテンツにスキップ

はじめに

The bands of the Basis Peak allow for several size adjustments for a snug fit to the user's wrist. A properly adjusted band is crucial to the functioning of the sensor on the underside of the watch. If the band is damaged or visibly tarnished, users can easily replace it with this guide. Two spring latches on the underside of the band halves must be released and the band halves will come right off.

パーツ

パーツは指定されていません。

  1. Flip the watch over to view the back panel and sensor. Arrange the watch so that the band clasp is away from you.
    • Flip the watch over to view the back panel and sensor. Arrange the watch so that the band clasp is away from you.

    • Keep the watch in this position to help you follow the rest of the guide.

  2. Release the spring latches on the underside of each band to remove the bands from the frame.
    • Release the spring latches on the underside of each band to remove the bands from the frame.

終わりに

To reattach the bands, follow these instructions in reverse order.

Alexander Halliwell

メンバー登録日: 2017年03月26日

213 ポイント

2のガイドは作成済み

チーム

UMass Dartmouth, Team S4-G4, Julie Spring 2017 UMass Dartmouth, Team S4-G4, Julie Spring 2017人のメンバー

UMASSD-JULIE-S17S4G4

4 メンバー

5のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 3

今までの合計 107