メインコンテンツにスキップ

Basis B1 Band LED Screen Replacement

必要な工具と部品

  1. Basis B1 Band LED Screen Replacement, Watch Strap: 手順 1、 1の画像 1
    • Wedge a plastic opening tool between band contacts.

  2. Basis B1 Band LED Screen Replacement: 手順 2、 1の画像 1
    • Push in plastic opening tool until the components click and pop out of the holder.

    • Repeat steps for other band.

  3. Basis B1 Band LED Screen Replacement, Back Plate: 手順 3、 1の画像 1
    • Remove four 4mm screws using a PH000 screwdriver.

    • Remove back plate.

  4. Basis B1 Band LED Screen Replacement, Battery: 手順 4、 1の画像 1
    • Use tweezers to remove elastomeric, or zebra, connector.

  5. Basis B1 Band LED Screen Replacement: 手順 5、 2の画像 1 Basis B1 Band LED Screen Replacement: 手順 5、 2の画像 2
    • Use the flat end of the spudger to carefully lift the battery until adhesive seal is broken.

  6. Basis B1 Band LED Screen Replacement: 手順 6、 1の画像 1
    • Use the pointy edge of the spudger tool to detach battery leads from the circuit board.

  7. Basis B1 Band LED Screen Replacement, LED Screen: 手順 7、 2の画像 1 Basis B1 Band LED Screen Replacement, LED Screen: 手順 7、 2の画像 2
    • Use PH000 screw driver to remove two 6mm bracketed screws.

    • Remove bracket.

  8. Basis B1 Band LED Screen Replacement: 手順 8、 1の画像 1
    • Use PH000 tool to remove two 4mm screws.

  9. Basis B1 Band LED Screen Replacement: 手順 9、 1の画像 1
  10. Basis B1 Band LED Screen Replacement: 手順 10、 1の画像 1
    • Use spudger tool to lift the clasp of LED connector strip and remove from watch case.

  11. Basis B1 Band LED Screen Replacement: 手順 11、 1の画像 1
    • Use spudger tool to remove the LED screen from the watch case.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

1人の作成者と共同作成されました。

Kaitlyn Lee

メンバー登録日: 11/06/17

518 ポイント

4のガイドは作成済み

チーム

IUPUI, Team S6-G1, Baechle Fall 2017 IUPUI, Team S6-G1, Baechle Fall 2017人のメンバー

IUPUI-BAECHLE-F17S6G1

4 メンバー

4のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 3

今までの合計 200