メインコンテンツにスキップ

はじめに

The frame cover protects the battery and the inside components of the device.

パーツ

パーツは指定されていません。

  1. Pry the back cover from the bottom of the phone, pulling outwards and upwards.
    • Pry the back cover from the bottom of the phone, pulling outwards and upwards.

  2. Fully remove the cover and set aside in a safe place.
    • Fully remove the cover and set aside in a safe place.

  3. iPhoneのバッテリーキット

    Only $29.99

    Buy Now

    iPhoneのバッテリーキット

    Only $29.99

    Buy Now
  4. Remove all the nine 2mm screws using the JIS #00 Screwdriver.
    • Remove all the nine 2mm screws using the JIS #00 Screwdriver.

  5. Pry the frame off using the spudger pulling upwards going to different areas around the device.
    • Pry the frame off using the spudger pulling upwards going to different areas around the device.

    • The back cover is secured by glue. Removal could be more difficult than expected.

まとめ

To reassemble your device, follow these instructions in reverse order. Ensure that all sides of the frame cover are firmly snapped on before replacing the screws.

ある他の人がこのガイドを完成しました。

Tione Gooden

メンバー登録日: 2018年09月21日

269 ポイント

2のガイドは作成済み

チーム

University of North Texas, Team S5-G7, Thompson Fall 2018 University of North Texas, Team S5-G7, Thompson Fall 2018人のメンバー

UNT-THOMPSON-F18S5G7

3 メンバー

5のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 86