メインコンテンツにスキップ

BLU WIN HD LTE Camera Replacement

必要な工具と部品

  1. BLU WIN HD LTE Camera Replacement, Back Case: 手順 1、 1の画像 1
    • Pry the back cover from the bottom of the phone, pulling outwards and upwards.

  2. BLU WIN HD LTE Camera Replacement: 手順 2、 1の画像 1
    • Fully remove the cover and set aside in a safe place.

  3. BLU WIN HD LTE Camera Replacement, Frame Cover: 手順 3、 1の画像 1
    • Remove all the nine 2mm screws using the JIS #00 Screwdriver.

  4. BLU WIN HD LTE Camera Replacement: 手順 4、 1の画像 1
    • Pry the frame off using the spudger pulling upwards going to different areas around the device.

    • The back cover is secured by glue. Removal could be more difficult than expected.

  5. BLU WIN HD LTE Camera Replacement, Camera: 手順 5、 3の画像 1 BLU WIN HD LTE Camera Replacement, Camera: 手順 5、 3の画像 2 BLU WIN HD LTE Camera Replacement, Camera: 手順 5、 3の画像 3
    • Pry off the low profile connector located on the right side of the camera device.

  6. BLU WIN HD LTE Camera Replacement: 手順 6、 1の画像 1
    • Pull the camera out.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

3人の作成者と共同で作成されました。

Taelar Tritton-Bowman

メンバー登録日: 09/21/18

249 ポイント

3のガイドは作成済み

チーム

University of North Texas, Team S5-G7, Thompson Fall 2018 University of North Texas, Team S5-G7, Thompson Fall 2018人のメンバー

UNT-THOMPSON-F18S5G7

3 メンバー

5のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 3

今までの合計 283