はじめに

The battery is what powers the device. The battery is secured by a sticky adhesive label and glue so be cautious when removing.

パーツ

パーツは必要ありません。

  1. Pry the back cover from the bottom of the phone, pulling outwards and upwards.
    • Pry the back cover from the bottom of the phone, pulling outwards and upwards.

  2. Fully remove the cover and set aside in a safe place.
    • Fully remove the cover and set aside in a safe place.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    当社のショップを閲覧する
  4. Remove all the nine 2mm screws using the JIS #00 Screwdriver.
    • Remove all the nine 2mm screws using the JIS #00 Screwdriver.

  5. Pry the frame off using the spudger pulling upwards going to different areas around the device.
    • Pry the frame off using the spudger pulling upwards going to different areas around the device.

    • The back cover is secured by glue. Removal could be more difficult than expected.

  6. Remove the battery out using the black nylon spudger. Battery is secured by glue so use more force to take it out.
    • Remove the battery out using the black nylon spudger.

    • Battery is secured by glue so use more force to take it out.

まとめ

To reassemble your device, follow these instructions in reverse order.

Taelar Tritton-Bowman

メンバー登録日: 2018年09月21日

249 ポイント

3のガイドは作成済み

チーム

University of North Texas, Team S5-G7, Thompson Fall 2018 University of North Texas, Team S5-G7, Thompson Fall 2018人のメンバー

UNT-THOMPSON-F18S5G7

3 メンバー

5のガイドは作成済み

統計データを表示:

過去 24時間: 0

過去 7 日: 5

過去 30 日: 14

今までの合計 124