メインコンテンツにスキップ

GPU Replacement

必要な工具と部品

  1. GPU Replacement, Graphics Processing Unit: 手順 1、 1の画像 1
    • Establish a clean work space.

  2. GPU Replacement: 手順 2、 3の画像 1 GPU Replacement: 手順 2、 3の画像 2 GPU Replacement: 手順 2、 3の画像 3
    • Turn the desktop's power supply off.

    • Unplug the desktop from all power sources.

  3. GPU Replacement: 手順 3、 2の画像 1 GPU Replacement: 手順 3、 2の画像 2
    • Remove the screws on the side of the case.

    • Screw types may vary by desktop case.

    • These screws hold the side panel, which promotes airflow inside the desktop. Do not misplace them.

  4. GPU Replacement: 手順 4、 2の画像 1 GPU Replacement: 手順 4、 2の画像 2
    • Gently remove the side panel by pulling it away from the case.

  5. GPU Replacement: 手順 5、 1の画像 1
    • Place the desktop horizontally, so the motherboard is facing up.

  6. GPU Replacement: 手順 6、 3の画像 1 GPU Replacement: 手順 6、 3の画像 2 GPU Replacement: 手順 6、 3の画像 3
    • Disconnect the 8-pin PCI-E cable from the GPU.

  7. GPU Replacement: 手順 7、 2の画像 1 GPU Replacement: 手順 7、 2の画像 2
    • Remove the UTS 6-32 screws on the side of the desktop using a Phillips #0 or a flathead screwdriver.

    • These screws hold the GPU in place. Do not misplace them.

  8. GPU Replacement: 手順 8、 2の画像 1 GPU Replacement: 手順 8、 2の画像 2
    • Gently press down on the right side of the PCI-E tab until there is a click.

    • The click signifies the GPU has been released.

  9. GPU Replacement: 手順 9、 1の画像 1
    • Gently pull the GPU out of the PCI-E slot.

  10. GPU Replacement: 手順 10、 3の画像 1 GPU Replacement: 手順 10、 3の画像 2 GPU Replacement: 手順 10、 3の画像 3
    • Line up the pins of the new GPU with the empty PCI-E slot.

    • Gently push the new GPU into the PCI-E slot until the tab clicks.

  11. GPU Replacement: 手順 11、 3の画像 1 GPU Replacement: 手順 11、 3の画像 2 GPU Replacement: 手順 11、 3の画像 3
    • Gently connect the 8-pin PCI-E cable from the power supply to the new GPU.

  12. GPU Replacement: 手順 12、 2の画像 1 GPU Replacement: 手順 12、 2の画像 2
    • Screw the UTS 6-32 screws which hold the GPU in place back in using a Phillips #0 screwdriver.

  13. GPU Replacement: 手順 13、 1の画像 1
    • Gently place the side panel back on the case.

  14. GPU Replacement: 手順 14、 3の画像 1 GPU Replacement: 手順 14、 3の画像 2 GPU Replacement: 手順 14、 3の画像 3
    • Screw in the side panel screws.

  15. GPU Replacement: 手順 15、 3の画像 1 GPU Replacement: 手順 15、 3の画像 2 GPU Replacement: 手順 15、 3の画像 3
    • Plug the desktop back into a power source.

    • Turn the desktop's power supply on.

    • If the fans on the bottom of the GPU are not spinning once the desktop is on, retry this process. Or begin troubleshooting for a defective GPU.

ゴール

2 の人々がこのガイドを完成させました。

作成者

4人の作成者と共同で作成されました。

Mason Price

メンバー登録日: 10/25/22

295 ポイント

1ガイドが承認済み

チーム

CSU Los Angeles, Team 2-16, Briggs Fall 2022 CSU Los Angeles, Team 2-16, Briggs Fall 2022人のメンバー

CSULA-BRIGGS-F22S2G16

1 メンバー

2のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 2

過去 7 日: 7

過去 30 日: 23

今までの合計 1,113