メインコンテンツにスキップ

Azpen A701 General Disassembly Prerequisite Guide Replacement

必要な工具と部品

  1. Azpen A701 General Disassembly Prerequisite Guide Replacement, General Disassembly Prerequisite Guide: 手順 1、 1の画像 1
    • Remove the two 2cm screws on the bottom using the PH0 Phillips head screw driver.

  2. Azpen A701 General Disassembly Prerequisite Guide Replacement: 手順 2、 2の画像 1 Azpen A701 General Disassembly Prerequisite Guide Replacement: 手順 2、 2の画像 2
    • Pry open back piece with plastic spudger.

    • Remove the back piece of the device.

    • The back panel may be difficult to pry off, use gentle force.

  3. Azpen A701 General Disassembly Prerequisite Guide Replacement: 手順 3、 1の画像 1
    • Disconnect speaker (which is attached by black and red wires) from back piece using plastic spudger.

  4. Azpen A701 General Disassembly Prerequisite Guide Replacement: 手順 4、 1の画像 1
    • Gently pry the battery off of the device with the plastic spudger.

    • There is a large amount of glue holding the battery to the device.

    • Do not puncture the battery with the plastic spudger.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

3人の作成者と共同で作成されました。

Michael

メンバー登録日: 03/11/15

568 ポイント

4のガイドは作成済み

チーム

Colorado Springs, Team 2-1, Panko Spring 2015 Colorado Springs, Team 2-1, Panko Spring 2015人のメンバー

UCCS-PANKO-S15S2G1

3 メンバー

12のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 1

今までの合計 349