Automatic Tommy 20 Ammo Drum Replacement

はじめに

This guide will help teach you how to remove and replace the drum of the gun that holds your darts. This require splitting the gun into two halves and requires a #00 Phillips head screwdriver, but is otherwise fairly simple. Just follow the steps and get your gun back into fighting shape!

必要な工具と部品

手順1 Splitting the Gun into Two Halves

Automatic Tommy 20 Ammo Drum Replacement, Splitting the Gun into Two Halves: 手順 1、 2の画像 1

Automatic Tommy 20 Ammo Drum Replacement, Splitting the Gun into Two Halves: 手順 1、 2の画像 2

Locate the orange slider on the front side of the gun.
Pull the orange slider towards the back of the gun while lifting up on the nose the gun.

編集

手順2

Automatic Tommy 20 Ammo Drum Replacement: 手順 2、 3の画像 3

Remove the single 1/8 in. screw at the junction of the body and the nose using a Philips #00 Screwdriver.
Remove all parts within the chamber to be able to completely detach the nose of the gun.
Be careful to keep track of all the components for reassembly.

編集

手順3 Ammo Drum

Automatic Tommy 20 Ammo Drum Replacement, Ammo Drum: 手順 3、 3の画像 1

Automatic Tommy 20 Ammo Drum Replacement, Ammo Drum: 手順 3、 3の画像 2

Automatic Tommy 20 Ammo Drum Replacement, Ammo Drum: 手順 3、 3の画像 3

Remove the 1/16 in. screws using a Phillips #00 Screwdriver as indicated in the photo on the left.
Remove the 1 mm screw on the battery lid using a Philips #1 Screwdriver as indicated in the photo on the left.

編集