修理を始めるには コミュニティ ストア

Audiovox CDM-8900 Motherboard Replacement

作成者： Aaron Shaw (そして 11 人のその他投稿者)
  • コメント: 0
  • お気に入り: 3
  • 完了: 1

難易度

普通

手順

5

所要時間

5分

セクション

3

フラグ

4

Needs Better Images

高画質の画像が必要

よりよい画像があればこのガイドが改善されます。よければ新しい写真を撮影し、編集し、アップロードしてお手伝いください。

Inconsistent Images

一貫性のない画像

このガイドの画像を必要条件ガイドとより一致するように変更するとさらに素晴らしくなります。

Missed a Step

手順の記述もれ

申し訳ございませんがこのガイドは、いくつかの重要なステップが不足しています。

Better Introduction

より良い紹介部分

この紹介部分を完成し編集することでこのガイドを改良する

はじめに

This is how to remove the 5 screws and pry the logic board free.

ツール

これらのツールを購入する

パーツ

パーツは指定されていません。

  1. Hold the phone in one hand, slide the latch up, and pull the battery up to remove it. Hold the phone in one hand, slide the latch up, and pull the battery up to remove it.

    • Hold the phone in one hand, slide the latch up, and pull the battery up to remove it.

    翻訳

  2. Grasp the antenna at its base and twist to unscrew. Remove the antenna along with its plastic casing from inside the battery housing. Keep the antenna in the plastic casing for reassembly. Remove the antenna along with its plastic casing from inside the battery housing. Keep the antenna in the plastic casing for reassembly.

    • Grasp the antenna at its base and twist to unscrew.

    • Remove the antenna along with its plastic casing from inside the battery housing. Keep the antenna in the plastic casing for reassembly.

    翻訳

  4. Remove the small rubber insert from the top of the phone to access the top screw. Unscrew all five screws on the back of the cell phone with a Phillips #00 screwdriver. If screws do not slide out after unscrewing, gently flip and tap the phone in your hand until the screws come loose.

    • Remove the small rubber insert from the top of the phone to access the top screw.

    • Unscrew all five screws on the back of the cell phone with a Phillips #00 screwdriver.

    • If screws do not slide out after unscrewing, gently flip and tap the phone in your hand until the screws come loose.

    翻訳

  5. Wedge the phone plate toward you, using the leverage from an opening tool. The volume control button on the left side of the phone will loosen. Make sure to carefully reinsert it during reassembly. Detach the motherboard from the LCD screen connector by gently detaching the small copper plate on the top right of the motherboard.

    • Wedge the phone plate toward you, using the leverage from an opening tool.

    • The volume control button on the left side of the phone will loosen. Make sure to carefully reinsert it during reassembly.

    • Detach the motherboard from the LCD screen connector by gently detaching the small copper plate on the top right of the motherboard.

    翻訳

  6. To release the motherboard, push the large "OK" button located on the other side of the phone. Before reassembly, make sure the keypad is lined up with the motherboard. Be sure the camera lens is properly aligned at the top of the motherboard and the volume controls are in place. Before reassembly, make sure the keypad is lined up with the motherboard. Be sure the camera lens is properly aligned at the top of the motherboard and the volume controls are in place.

    • To release the motherboard, push the large "OK" button located on the other side of the phone.

    • Before reassembly, make sure the keypad is lined up with the motherboard. Be sure the camera lens is properly aligned at the top of the motherboard and the volume controls are in place.

    翻訳
終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

11他の投稿者と一緒に

Aaron Shaw

メンバー登録日: 2010年04月15日

150 ポイント

6のガイドは作成済み

バッジ: 6

+3 個以上のバッジ

チーム

Cal Poly, Team 28-31, Regan Spring 2010 Cal Poly, Team 28-31, Regan Spring 2010人のメンバー

CPSU-REGAN-S10S28G31

4 メンバー

12のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 3

今までの合計 2,679