メインコンテンツにスキップ

Atari 5200 Joystick Repair

必要な工具と部品

  1. Atari 5200 Joystick Repair, Opening the Controller: 手順 1、 3の画像 1 Atari 5200 Joystick Repair, Opening the Controller: 手順 1、 3の画像 2 Atari 5200 Joystick Repair, Opening the Controller: 手順 1、 3の画像 3
    • Turn the controller over, exposing the three screws on the back. Use a 6mm screwdriver to remove these screws.

    • Carefully slide and pull the two parts of the controller shell apart, exposing the innards.

  2. Atari 5200 Joystick Repair, Locating the Knobs and Pots: 手順 2、 1の画像 1
    • Find the knobs (closest to the joystick and circled in red).

    • Locate the pots (closest to the circuitry and circled in orange). Keep track of these.

    • Align the joystick's metal bar into its cup.

    • Don't move any of the button circuitry, especially those of the START/PAUSE/RESET buttons.

  3. Atari 5200 Joystick Repair, Reassembly Part 1: 手順 3、 1の画像 1
    • Use a spudger to remove the top frame.

    • Take off the plate.

    • Remove the rubber buttons.

  4. Atari 5200 Joystick Repair, Reassembly Part 2: 手順 4、 2の画像 1 Atari 5200 Joystick Repair, Reassembly Part 2: 手順 4、 2の画像 2
    • Realign the top and bottom of the controller.

    • Pull the circuit strip through the new space.

  5. Atari 5200 Joystick Repair, Reassembly Part 3: 手順 5、 3の画像 1 Atari 5200 Joystick Repair, Reassembly Part 3: 手順 5、 3の画像 2 Atari 5200 Joystick Repair, Reassembly Part 3: 手順 5、 3の画像 3
    • Return the start buttons to the top of the controller

    • Snap the frame back into place

    • Screw in the three screws on the back.

ゴール

4 の人々がこのガイドを完成させました。

作成者

6人の作成者と共同で作成されました。

Alan Abelson

メンバー登録日: 09/26/14

233 ポイント

5のガイドは作成済み

チーム

USF Tampa, Team 13-1, Staggers Fall 2014 USF Tampa, Team 13-1, Staggers Fall 2014人のメンバー

USFT-STAGGERS-F14S13G1

5 メンバー

17のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 12

過去 30 日: 33

今までの合計 3,214