メインコンテンツにスキップ

このバージョンは誤った内容を含んでいる可能性があります。最新の承認済みスナップショットに切り替えてください。

必要な工具と部品

  1. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 1、 3の画像 1 : 手順 1、 3の画像 2 : 手順 1、 3の画像 3
    • Switch off the Laptop and remove the Battery.

    • Unscrew the two Philips screws and remove the HDD / RAM Cover.

  2. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 2、 3の画像 1 : 手順 2、 3の画像 2 : 手順 2、 3の画像 3
    • Remove three screws securing the hard drive caddy (hard drive assembly).

    • Slide the hard drive assembly to the left to disconnect it from the motherboard.

  3. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 3、 1の画像 1
    • Remove the two Philips screws and separate the HDD from the caddy case.

    • You can install 2.5" SATA HDD, 5400rpm / 7200rpm, 320GB / 500GB / 750GB /1TB.

    • After changing / upgrading the HDD you must install an operating system or clone & copy the information from the old HDD to the new one.

    • .

    • Did you do it successfully.

    • Please SUBSCRIBE to my channel ツ

ゴール

4 の人々がこのガイドを完成させました。

作成者

2人の作成者と共同で作成されました。

ZFix

メンバー登録日: 12/09/13

191,566 ポイント

330のガイドは作成済み

チーム

Master Techs Master Techs人のメンバー

Community

321 メンバー

1,490のガイドは作成済み

コメント 1 件

Were do you get the OS already installed on the drive. I have a Asus 550 with a 500 G and win 8.1. Looking to up grade to win 10 YES i have the GEO FORCE graphic card. Will I loose the use of the GEO FORCE. card. It has a i7 chip. And 6 g of line one cache would like to take to like 16 G… I would like to use the solid state hard drive. I understand it weathers bounces. Small slams and bangs better than the disc type. But I may not beable to afford this high a upgrade. Recommendations chrisdeiotte7@gmail.com

Chris Deiotte - 返信

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 5

過去 30 日: 32

今までの合計 11,436