はじめに

How to disassemble the laptop and replace the cooling / fan system.

_______________ Video manual: _______________

ビデオの概要

Switch off the laptop and remove the battery.
  • Switch off the laptop and remove the battery.

コメントを追加する

The Keyboard is held by 5x locking clips. Pick up a little the one side of the Keyboard and start opening the clips one by one. Disconnect the Keyboard flex cable from the mother board and remove the KB.
  • The Keyboard is held by 5x locking clips.

  • Pick up a little the one side of the Keyboard and start opening the clips one by one.

  • Disconnect the Keyboard flex cable from the mother board and remove the KB.

  • Please SUBSCRIBE to my channel ツ

コメントを追加する

Remove 3x Philips screws. Disconnect the two small flex cables:
  • Remove 3x Philips screws.

  • Disconnect the two small flex cables:

    • Power On button flex cable

    • Touch pad flex cable

コメントを追加する

Unscrew the two Philips screws and remove the HDD / RAM Cover. Remove three screws securing the hard drive caddy (hard drive assembly). Slide the hard drive assembly to the left to disconnect it from the motherboard.
  • Unscrew the two Philips screws and remove the HDD / RAM Cover.

  • Remove three screws securing the hard drive caddy (hard drive assembly).

  • Slide the hard drive assembly to the left to disconnect it from the motherboard.

コメントを追加する

Disconnect the two coaxial antenna cables from the Wi-Fi card. Remove any Memory or Dummy card.
  • Disconnect the two coaxial antenna cables from the Wi-Fi card.

  • Remove any Memory or Dummy card.

コメントを追加する

The bottom cover is held by 10x Phillips screws. Remove them. With a plastic tool separate the Upper cover and remove it. With a plastic tool separate the Upper cover and remove it.
  • The bottom cover is held by 10x Phillips screws. Remove them.

  • With a plastic tool separate the Upper cover and remove it.

コメントを追加する

Disconnect: The Microphone cable The LCD Display flex cable
  • Disconnect:

    • The Microphone cable

    • The LCD Display flex cable

  • Remove 3x Pillips screws.

  • Lift the board first from the right edge.

  • There is another one cable, from the DC connector, connected to the underside of main board. We should spun the the board to disconnect the DC connector cable.

コメントを追加する

ASUS X55C iCore with 4GB no board RAM motherboard, model: 60-N0OMB1100 Please SUBSCRIBE to my channel  ツ

コメントを追加する

Disconnect the Fan cable from the Motherboard. Remove the screws (4x Phillips screws) that hold the cooling system to the Motherboard CPU Cooling System - Cooling Heatsink and Fan.
  • Disconnect the Fan cable from the Motherboard.

  • Remove the screws (4x Phillips screws) that hold the cooling system to the Motherboard

  • CPU Cooling System - Cooling Heatsink and Fan.

  • Remove the Cooling System carefully, if you don't want to break the CPU.

  • Before installing the new Cooling System, clean the CPU and put new thermal compound / paste.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

ZFix

メンバー登録日: 2013年12月09日

150,379 ポイント

424のガイドは作成済み

チーム

Master Techs Master Techs人のメンバー

Community

274 メンバー

713のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 3

過去 7 日: 10

過去 30 日: 30

今までの合計 1,965