メインコンテンツにスキップ

Asus X202E-UH31T Headphone Jack Replacement

必要な工具と部品

  1. Asus X202E-UH31T Headphone Jack  Replacement, Headphone Jack: 手順 1、 1の画像 1
    • Remove the 9 1.2mm phillips head screws on the bottom of the computer using the smaller Phillips head screw driver.

  2. Asus X202E-UH31T Headphone Jack  Replacement: 手順 2、 1の画像 1
    • Use a plastic opening tool to open the components of the laptop. In order to do this, insert the plastic opening tool in between the two covers then pry open.

  3. Asus X202E-UH31T Headphone Jack  Replacement: 手順 3、 1の画像 1
    • Once the back is off the device, unscrew the 7 1.2 mm phillips head screws that hold the battery in place. Use the smallest (#0) phillips head screw driver

    • Once the screws holding the battery are out, use the plastic opening tool to disconnect the battery cable ribbon from the motherboard

  4. Asus X202E-UH31T Headphone Jack  Replacement: 手順 4、 1の画像 1
    • Remove the 7 1.2mm screws holding the secondary motherboard in place. Following that undo the speaker ribbon

    • Pop off the secondary mother board using your fingers.

  5. Asus X202E-UH31T Headphone Jack  Replacement: 手順 5、 1の画像 1
    • Desolder the headphone jack or completely replace the secondary motherboard chip.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

3人の作成者と共同で作成されました。

Brandon Bloomfield

メンバー登録日: 09/08/17

523 ポイント

5のガイドは作成済み

チーム

Western Carolina University, Team S1-G5, Virtue Fall 2017 Western Carolina University, Team S1-G5, Virtue Fall 2017人のメンバー

WCU-VIRTUE-F17S1G5

4 メンバー

5のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 10

今までの合計 303