難易度
普通
手順
5
所要時間
必要時間を提案??
- Keyboard Assembly 2手順
- Wireless Card 3手順
より良い紹介部分
この紹介部分を完成し編集することでこのガイドを改良する
パーツ
パーツは必要ありません。
-
Remove the following six screws:
-
Six 4 mm Phillips #0 using a phillips scredriver
-
-
Remove the following one screw:
-
One 14 mm Phillips #0 using a phillips screwdriver
-
-
Use a plastic or metal spudger to separate the keyboard from the back panel and lift the keyboard out of place.
How exactly does the keyboard pod out ? It doesn’t come off at the screen hinge.
-
Take gold cap that connects to a black wire off using the metal spudger.
-
Remove the following two screws:
-
Two 4 mm screws using Phillips #0 screwdriver.
-
-
Slide the component up and out.
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
2 の人々がこのガイドを完成させました。
チーム
Cal Poly, Team 21-24, Maness Winter 2015 Cal Poly, Team 21-24, Maness Winter 2015人のメンバー
CPSU-MANESS-W15S21G24
4 メンバー
6のガイドは作成済み
There are also two other screws under the rubber feet above the battery.
digg1024 - 返信