パーツ

パーツは必要ありません。

  1. Remove the following six screws:
    • Remove the following six screws:

      • Six 4 mm Phillips #0 using a phillips scredriver

    • Remove the following one screw:

      • One 14 mm Phillips #0 using a phillips screwdriver

    • The 14mm screw goes in the center.

  2. Use a plastic or metal spudger to separate the keyboard from the back panel and lift the keyboard out of place.
    • Use a plastic or metal spudger to separate the keyboard from the back panel and lift the keyboard out of place.

    • Remove the black foam and adhesive located on top of the hard drive.

    • Remove the following four screws:

      • Four 4 mm Phillips #0 using a phillips screwdriver.

    • Slide out the hard drive

まとめ

To reassemble your device, follow these instructions in reverse order.

3 の人々がこのガイドを完成させました。

Vanessa Garcia

メンバー登録日: 2015年01月22日

1,550 ポイント

6のガイドは作成済み

チーム

Cal Poly, Team 21-24, Maness Winter 2015 Cal Poly, Team 21-24, Maness Winter 2015人のメンバー

CPSU-MANESS-W15S21G24

4 メンバー

6のガイドは作成済み

コメント1件

You FORGOT TO MENTION that one must remove the 2 Rubber feet to get at 2 more screws :-(((((((

Matthew Miller - 返信

統計データを表示:

過去 24時間: 3

過去 7 日: 14

過去 30 日: 83

今までの合計 6,587