メインコンテンツにスキップ

はじめに

This guide will show you how to remove the back panel of the Asus VivoTab Smart and replace the speaker. You can find the necessary tools for this project in the tools section below.

  1. Power off the device before you begin disassembly. Place the device face down on a flat surface. Remove the back panel with the plastic opening tool by sliding the tool around the edge of the panel.
    • Power off the device before you begin disassembly.

    • Place the device face down on a flat surface.

    • Remove the back panel with the plastic opening tool by sliding the tool around the edge of the panel.

  2. Take care not to break the speaker wire when unplugging it from the device. Carefully unplug the speaker wire from the device by grabbing the wire near the white plug with tweezers and pulling gently. Carefully unplug the speaker wire from the device by grabbing the wire near the white plug with tweezers and pulling gently.
    • Take care not to break the speaker wire when unplugging it from the device.

    • Carefully unplug the speaker wire from the device by grabbing the wire near the white plug with tweezers and pulling gently.

  3. iPhoneのバッテリーキット

    Only $29.99

    Buy Now

    iPhoneのバッテリーキット

    Only $29.99

    Buy Now
  4. Remove two 2.7 mm Phillips #00 screws. Remove two 3.7 mm Phillips #00  screws.
    • Remove two 2.7 mm Phillips #00 screws.

    • Remove two 3.7 mm Phillips #00 screws.

  5. Remove the speaker from the device by lifting up on it.
    • Remove the speaker from the device by lifting up on it.

まとめ

To reassemble your device, follow these instructions in reverse order.

Zach Hatten

メンバー登録日: 2016年10月06日

548 ポイント

4のガイドは作成済み

チーム

USF Tampa, Team 2-4, Sullivan Fall 2016 USF Tampa, Team 2-4, Sullivan Fall 2016人のメンバー

USFT-SULLIVAN-F16S2G4

4 メンバー

5のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 147