パーツ

パーツは必要ありません。

  1. Place the device upside-down. Unscrew the screw at the top of the cover and remove the cover by using a plastic opening tool.
    • Place the device upside-down. Unscrew the screw at the top of the cover and remove the cover by using a plastic opening tool.

  2. Remove the screw that is located on the right edge of the removed cover. The screw is in a small opening.
    • Remove the screw that is located on the right edge of the removed cover. The screw is in a small opening.

    • Inside the opening that the screw was in, use a nylon spudger or any thin tool to push against the inside edge of the disc/optical drive.

    • With the disc/optical drive slightly popped out of the socket, pull the rest of it out by hand.

まとめ

To reassemble your device, follow these instructions in reverse order.

Jackson Reynolds

メンバー登録日: 2018年09月18日

328 ポイント

3のガイドは作成済み

チーム

University of North Texas, Team S3-G7, Raign Fall 2018 University of North Texas, Team S3-G7, Raign Fall 2018人のメンバー

UNT-RAIGN-F18S3G7

3 メンバー

4のガイドは作成済み

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 24

今までの合計 40