メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

パーツ

パーツは指定されていません。

  1. Begin by removing the two screw covers, either by hand or the tip of a screwdriver. Begin by removing the two screw covers, either by hand or the tip of a screwdriver.
    • Begin by removing the two screw covers, either by hand or the tip of a screwdriver.

  2. Then remove both screws with a Philips head screwdriver.
    • Then remove both screws with a Philips head screwdriver.

  3. Next use a spudger or very carefully use a flat head screwdriver to wedge between the center of the screen. You will have to go completely around the screen and release all latches keeping the two parts together. Next use a spudger or very carefully use a flat head screwdriver to wedge between the center of the screen. You will have to go completely around the screen and release all latches keeping the two parts together.
    • Next use a spudger or very carefully use a flat head screwdriver to wedge between the center of the screen. You will have to go completely around the screen and release all latches keeping the two parts together.

  4. The Essential Toolkit

    コンパクト版iFixitキットの中で最も利便性の高いツール

    ショップを見る

    The Essential Toolkit

    コンパクト版iFixitキットの中で最も利便性の高いツール

    ショップを見る
  5. The screen will split into two parts. The screen will split into two parts.
    • The screen will split into two parts.

  6. Remove any tape that is holding the screen in place.
    • Remove any tape that is holding the screen in place.

  7. After any tape is removed the screen needs to be lifted out. It may be a little stuck due to tape or any remaining glue. After any tape is removed the screen needs to be lifted out. It may be a little stuck due to tape or any remaining glue.
    • After any tape is removed the screen needs to be lifted out. It may be a little stuck due to tape or any remaining glue.

  8. Remove the last cable attached to the screen by pulling horizontally away. Set old screen aside and follow steps in reverse to put in the new one.
    • Remove the last cable attached to the screen by pulling horizontally away. Set old screen aside and follow steps in reverse to put in the new one.

終わりに

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

Alexander Boettcher

メンバー登録日: 2017年09月25日

600 ポイント

5のガイドは作成済み

チーム

University of North Texas, Team S6-G5, Thomas Fall 2017 University of North Texas, Team S6-G5, Thomas Fall 2017人のメンバー

UNT-THOMAS-F17S6G5

4 メンバー

5のガイドは作成済み

コメント1件

Can you show the connection on motherboard for LCD cable?

Bustelo Pilon - 返信

コメントを追加

統計データを表示:

過去 24時間: 1

過去 7 日: 2

過去 30 日: 18

今までの合計 623