ツール

パーツ

パーツは必要ありません。

  1. unscrew these two screws to remove the coverage
    • unscrew these two screws to remove the coverage

  2. unscrew these four screws to take out the case with the hard drive disk
    • unscrew these four screws to take out the case with the hard drive disk

  3. slip the hard drive to the left
    • slip the hard drive to the left

  4. Pro Tech ツールキットを含むご注文、もしくは総額 $100ドル以上のご注文については送料無料です。

    当社のショップを閲覧する
  5. pull the strap to remove the hard drive's case
    • pull the strap to remove the hard drive's case

  6. unscrew the four screws of the case to remove the hard drive out of that case
    • unscrew the four screws of the case to remove the hard drive out of that case

  7. remove the hard drice from its case
    • remove the hard drice from its case

  8. put the new hard drive or SSD, respectively in the case and fix the screws again (the HDD/SDD will only fit in the case in one way)
    • put the new hard drive or SSD, respectively in the case and fix the screws again (the HDD/SDD will only fit in the case in one way)

  9. slip the case to the right to plug in the HDD/SDD again
    • slip the case to the right to plug in the HDD/SDD again

  10. close the case again
    • close the case again

まとめ

To reassemble your device, follow these instructions in reverse order.

Mojo

メンバー登録日: 2014年09月22日

113 ポイント

1ガイドが承認済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 11

今までの合計 1,271