メインコンテンツにスキップ

このバージョンは誤った内容を含んでいる可能性があります。最新の承認済みスナップショットに切り替えてください。

必要な工具と部品

  1. 注意: 手順 1 は、作業進行中としてマークされている ガイド から引用されています。

    この手順は未翻訳です。 翻訳を手伝う。

    • Power off the device completely

    • Flip the device over to its back cover.

    • Use the switches to release the battery from its adapter.

  2. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 2、 1の画像 1
    • To access the compartment that holds the RAM, flip the laptop so the bottom cover is facing upward and the battery compartment is facing away from you.

  3. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 3、 1の画像 1
    • Use a Phillips #0 screwdriver to remove the two screws that hold down the compartment cover.

  4. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 4、 1の画像 1
    • Lift the cover and locate the green and blue RAM sticks on the right side of the device.

  5. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 5、 3の画像 1 : 手順 5、 3の画像 2 : 手順 5、 3の画像 3
    • To remove the green RAM stick, push outward on the inner sides of the two metal chip holders simultaneously.

    • Pull out the stick once it is released from the holders.

    • Repeat this step on the lower level that holds the blue RAM stick.

ゴール

2 の人々がこのガイドを完成させました。

作成者

1人の作成者と共同作成されました。

Dahlia Adam

メンバー登録日: 09/21/18

260 ポイント

1ガイドが承認済み

チーム

University of North Texas, Team S1-G4, Riccardelli Fall 2018 University of North Texas, Team S1-G4, Riccardelli Fall 2018人のメンバー

UNT-RICCARDELLI-F18S1G4

4 メンバー

5のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 2

過去 7 日: 6

過去 30 日: 18

今までの合計 788