メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

はじめに

In this guide you will learn how to replace the speakers in an Asus EeeBook X205TA.

  1. Unscrew all ten 2mm screws located on the bottom of the laptop using a Phillips #2 screwdriver. Unscrew all ten 2mm screws located on the bottom of the laptop using a Phillips #2 screwdriver.
    • Unscrew all ten 2mm screws located on the bottom of the laptop using a Phillips #2 screwdriver.

  2. Insert the plastic opening tool in the crevice between the back of the laptop and the rest of the case.
    • Insert the plastic opening tool in the crevice between the back of the laptop and the rest of the case.

    • Carefully pry open the case from several points.

    • Slowly remove the back of the laptop, revealing the parts inside.

  3. Unscrew all six 2mm screws using Philips #2 screws along the edges of the L-Shaped battery. Any tape or cords that run along the battery should be carefully pushed to the side.
    • Unscrew all six 2mm screws using Philips #2 screws along the edges of the L-Shaped battery.

    • Any tape or cords that run along the battery should be carefully pushed to the side.

  4. iPhone LCDスクリーン修理キット

    生涯保証付きの低コストオプション

    キット商品を見る

    iPhone LCDスクリーン修理キット

    品質ではなく、修理コストを削減しましょう。

    キット商品を見る
  5. Disconnect the battery from the motherboard by pulling the  No-Fuss Ribbon cables out of the connector.
    • Disconnect the battery from the motherboard by pulling the No-Fuss Ribbon cables out of the connector.

  6. Carefully lift the battery out of the laptop.
    • Carefully lift the battery out of the laptop.

  7. Locate and lift the tabs from the LED/motherboard ribbon cable.
    • Locate and lift the tabs from the LED/motherboard ribbon cable.

    • Remove the cable.

  8. Unplug the speaker cable from the motherboard.
    • Unplug the speaker cable from the motherboard.

  9. Pry the right speaker gently with the plastic opening tool.
    • Pry the right speaker gently with the plastic opening tool.

  10. Pry the left speaker gently with the plastic opening tool.
    • Pry the left speaker gently with the plastic opening tool.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

William Riggins

メンバー登録日: 2017年03月21日

312 ポイント

2のガイドは作成済み

チーム

IUPUI, Team S3-G4, Baechle Spring 2017 IUPUI, Team S3-G4, Baechle Spring 2017人のメンバー

IUPUI-BAECHLE-S17S3G4

4 メンバー

6のガイドは作成済み

2 件のコメント

Thank you very much for this detailed and helpful tutorial.

andrew - 返信

Thanks. You’ve helped make it clearer for me!

geometry dash

Martin Tolley - 返信

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 11

今までの合計 569