メインコンテンツにスキップ

Astak Mole Antenna Replacement

必要な工具と部品

  1. Astak Mole Antenna Replacement, Lower Case: 手順 1、 1の画像 1
    • Remove the four bottom tabs in order to access the bottom screws.

  2. Astak Mole Antenna Replacement: 手順 2、 1の画像 1
    • Remove all four 14 mm Phillips #1 screws.

  3. Astak Mole Antenna Replacement: 手順 3、 1の画像 1
    • Remove the SD card.

  4. Astak Mole Antenna Replacement: 手順 4、 1の画像 1
    • Pry up the motherboard on the four points using a spudger.

    • The regular black nylon spudger should be used whenever possible, especially around sensitive internal components.

  5. Astak Mole Antenna Replacement: 手順 5、 1の画像 1
    • Gently pull back the motherboard to expose many of the component's wired connections.

  6. Astak Mole Antenna Replacement, Antenna: 手順 6、 2の画像 1 Astak Mole Antenna Replacement, Antenna: 手順 6、 2の画像 2
    • Unscrew the antenna in a counter-clockwise rotation.

  7. Astak Mole Antenna Replacement: 手順 7、 1の画像 1
    • Take out the screw holding the antenna wire with the PH1 size Phillips head bit.

    • Screw length: 5.3mm

  8. Astak Mole Antenna Replacement: 手順 8、 1の画像 1
    • Gently pry open the circuit board attached to the antenna wire using a metal spudger.

    • The regular black nylon spudger should be used whenever possible, especially around sensitive internal components.

  9. Astak Mole Antenna Replacement: 手順 9、 1の画像 1
    • Remove the antenna female end from the motherboard.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

5人の作成者と共同で作成されました。

Meshari Alkhelaiwi

メンバー登録日: 09/15/16

143 ポイント

1ガイドが承認済み

チーム

USF Tampa, Team 2-2, Blackwell Fall 2016 USF Tampa, Team 2-2, Blackwell Fall 2016人のメンバー

USFT-BLACKWELL-F16S2G2

4 メンバー

12のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 3

今までの合計 436