メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

はじめに

This guide describes the process of removing the main housing of the vacuum from the vacuum bucket and the opening of the main housing as a prerequisite to servicing or replacing the internal components.

パーツ

パーツは指定されていません。

  1. Remove the orange main housing unit from the vacuum bucket by pulling outward on the handle tabs while lifting upward as shown.
    • Remove the orange main housing unit from the vacuum bucket by pulling outward on the handle tabs while lifting upward as shown.

  2. Remove the five 15mm PH2 screws.
    • Remove the five 15mm PH2 screws.

  3. Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits

    Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits
  4. Remove the 15 mm T20 screw. This screw is located nearest the power cord.
    • Remove the 15 mm T20 screw. This screw is located nearest the power cord.

  5. Gently separate the upper and lower sections of the main housing. Gently separate the upper and lower sections of the main housing.
    • Gently separate the upper and lower sections of the main housing.

終わりに

To reassemble your device, follow these instructions in reverse order.

4 の人々がこのガイドを完成させました。

Brad Patterson

メンバー登録日: 2016年02月09日

317 ポイント

1ガイドが承認済み

チーム

IUPUI, Team 2-1, Baechle Spring 2016 IUPUI, Team 2-1, Baechle Spring 2016人のメンバー

IUPUI-BAECHLE-S16S2G1

4 メンバー

4のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 10

今までの合計 233