Apple Powerbook 520/540 General Disassembly

作成者： Mark McNeff (そして 8 人のその他投稿者)

コメント: 6
お気に入り: 3
完了: 8

Apple Powerbook 520/540 General Disassembly

難易度

普通

手順

所要時間

必要時間を提案??

はじめに

In order to obtain access to the internal components you must first follow this step by step general disassembly guide. This will be a first stop in installing a new component that is enclosed by the outer shell.

ツール

これらのツールを購入する

Essential Electronics Toolkit

$24.99

購入する

パーツ

パーツは指定されていません。

手順1 Apple Powerbook 520/540 General Disassembly

Remove battery expansion cover and battery.

Turn computer over.
Remove battery expansion cover and battery.

編集

手順2

With monitor hinge at the bottom, remove the two top center screws.

With monitor hinge at the bottom, remove the two top center screws.

編集

手順3

Remove top left and top right screws.

編集

手順4

Remove middle left and middle right screws.

Remove middle left and middle right screws.

編集

手順5

Open computer kickstands.
Remove screws underneath each kickstand.

編集

手順6

Lift keyboard from bottom and take out of shell.

Lift keyboard from bottom and take out of shell.

編集

手順7

Lift the white ribbon clamps securing the keyboard ribbon cables to the motherboard. You can do this using a plastic opening tool.

Removing both ribbon cables from the motherboard will leave the clamps like so.

From here you can access the logic board, hard drive, and floppy drive.

Lift the white ribbon clamps securing the keyboard ribbon cables to the motherboard. You can do this using a plastic opening tool.
Removing both ribbon cables from the motherboard will leave the clamps like so.
From here you can access the logic board, hard drive, and floppy drive.