メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

はじめに

This repair will need:

A T8 Torx screwdriver.

パーツ

パーツは指定されていません。

  1. After completing the initial disassembly, you may proceed to hard drive replacement.
    • After completing the initial disassembly, you may proceed to hard drive replacement.

  2. First, you will need to remove the five T8 torx screws that mount the hard drive to the internal frame. Next, you will remove the mounting frame and the plastic shield.
    • First, you will need to remove the five T8 torx screws that mount the hard drive to the internal frame.

    • Next, you will remove the mounting frame and the plastic shield.

  3. Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits

    Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits
  4. You can use a spudger (tool shown in photo) to remove the ribbon cable from the hard drive.
    • You can use a spudger (tool shown in photo) to remove the ribbon cable from the hard drive.

  5. Carefully, pry the ribbon away from the pins.
    • Carefully, pry the ribbon away from the pins.

  6. Attach the ribbon cable to the new hard drive and follow steps 1-3, in reverse, to complete the installation.
    • Attach the ribbon cable to the new hard drive and follow steps 1-3, in reverse, to complete the installation.

終わりに

To reassemble your device, follow these instructions in reverse order.

4 の人々がこのガイドを完成させました。

Tyler

メンバー登録日: 2011年04月10日

132 ポイント

2のガイドは作成済み

チーム

Cal Poly, Team 20-66, Walters Spring 2011 Cal Poly, Team 20-66, Walters Spring 2011人のメンバー

CPSU-WALTERS-S11S20G66

4 メンバー

3のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 4

過去 30 日: 16

今までの合計 3,927