Amazon Luna Controller Battery Replacement - iFixit 修理ガイド

はじめに

Replacing the batteries in your Amazon Luna Controller is a quick and straightforward process, ensuring your gaming experience isn’t interrupted by a dead controller. This guide will walk you through each step, providing helpful tips along the way. Before you start, make sure you have two fresh AA batteries ready. If your controller has been unresponsive or the buttons feel laggy, a battery replacement might be all that’s needed to restore performance. Be cautious not to use damaged or leaking batteries, which can harm the device. Let’s get your controller powered up and ready to play.

手順1 Battery

Amazon Luna Controller Battery Replacement, Battery: 手順 1、 1の画像 1

Flip the controller over so that the back panel is facing up.

手順2

Amazon Luna Controller Battery Replacement: 手順 2、 3の画像 1

Amazon Luna Controller Battery Replacement: 手順 2、 3の画像 2

Amazon Luna Controller Battery Replacement: 手順 2、 3の画像 3

Locate the latch on the back panel.
Pull down gently to open the compartment and expose the battery slots.
Remove batteries.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

2人の作成者と共同で作成されました。

Cade Queen

メンバー登録日: 09/04/24

537 ポイント

5のガイドは作成済み

+5 個以上のバッジ

チーム

Western Carolina University, Team 1-4, Virtue Fall 2024 Western Carolina University, Team 1-4, Virtue Fall 2024人のメンバー

WCU-VIRTUE-F24S1G4

3 メンバー

5のガイドは作成済み

0件のガイドコメント

統計データ:

過去 24時間: 1

過去 7 日: 11

過去 30 日: 49

今までの合計 355