修理を始めるには コミュニティ ストア

Amazon Fire HD 10 Front Facing Camera Replacement

作成者： Jaie Hillery (そして 2 人のその他投稿者)
  • コメント: 5
  • お気に入り: 0
  • 完了: 1

難易度

簡単

手順

8

所要時間

6分

セクション

2

フラグ

0

はじめに

You will need to use the screen replacement guide as a prerequisite.

ツール

パーツ

パーツは指定されていません。

  1. Avoid prying near bottom right hand side due to LCD Connector Use a plastic opening tool to pry the screen up in the right hand corner. Use a plastic opening tool to pry the screen up in the right hand corner.

    • Avoid prying near bottom right hand side due to LCD Connector

    • Use a plastic opening tool to pry the screen up in the right hand corner.

    編集

  2. Do not completely remove the screen yet as there is a ZIF connector connected.

    • Do not completely remove the screen yet as there is a ZIF connector connected.

    • Lift the screen and digitizer from the case.

    • You may need to use some force due to the glue.

    編集

  3. Be mindful of the ZIF connector. Disconnect the ribbon connector from the digitizer side using your hands or the plastic opening tool.

    • Be mindful of the ZIF connector.

    • Disconnect the ribbon connector from the digitizer side using your hands or the plastic opening tool.

    編集

  5. Remove the screen and digitizer from the case completely.

    • Remove the screen and digitizer from the case completely.

    編集

  6. Remove the two screws from front facing camera using the T5 Torx Screwdriver. Make sure you place the screws in a safe location nearby. Make sure you place the screws in a safe location nearby.

    • Remove the two screws from front facing camera using the T5 Torx Screwdriver.

    • Make sure you place the screws in a safe location nearby.

    編集

  7. Lift the black plastic cover once the screws are removed. Place aside for later reassembly.

    • Lift the black plastic cover once the screws are removed.

    • Place aside for later reassembly.

    編集

  8. Detach the connector using a plastic opening tool or spudger. The camera is still connected to the motherboard.

    • Detach the connector using a plastic opening tool or spudger.

    • The camera is still connected to the motherboard.

    編集

  9. Grip the camera and lift up to detach the ZIF connector from the motherboard. Grip the camera and lift up to detach the ZIF connector from the motherboard.

    • Grip the camera and lift up to detach the ZIF connector from the motherboard.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

2他の投稿者と一緒に

Jaie Hillery

メンバー登録日: 2014年10月07日

1,676 ポイント

10のガイドは作成済み

バッジ: 22

+19 個以上のバッジ

チーム

USF Tampa, Team 16-6, Blackwell Winter 2016 USF Tampa, Team 16-6, Blackwell Winter 2016人のメンバー

USFT-BLACKWELL-W16S16G6

3 メンバー

22のガイドは作成済み

コメント1件

Can this camera module be upgraded with a better version?

Jimmy Kee - 返信

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 3

過去 30 日: 18

今までの合計 923