メインコンテンツにスキップ

Altec Lansing BoomJacket Speaker Replacement

必要な工具と部品

  1. Altec Lansing BoomJacket Speaker Replacement, Speaker: 手順 1、 1の画像 1
    • Using your hands, remove the pegs (4+4) from the front and back of the speaker.

  2. Altec Lansing BoomJacket Speaker Replacement: 手順 2、 1の画像 1
    • Remove the outer black rubber housing of the speaker.

  3. Altec Lansing BoomJacket Speaker Replacement: 手順 3、 1の画像 1
    • Remove the inner blue rubber housing from the speaker.

  4. Altec Lansing BoomJacket Speaker Replacement: 手順 4、 1の画像 1
    • Pull out the two black wire meshes using a metal spudger.

    • Be careful not to damage the metal casing.

  5. Altec Lansing BoomJacket Speaker Replacement: 手順 5、 2の画像 1 Altec Lansing BoomJacket Speaker Replacement: 手順 5、 2の画像 2
    • Using tweezers remove the rubber stoppers (4 at the back + 2 at the front).

  6. Altec Lansing BoomJacket Speaker Replacement: 手順 6、 1の画像 1
    • Using the size PH1 screwdriver remove the screws (4 around each speaker).

  7. Altec Lansing BoomJacket Speaker Replacement: 手順 7、 1の画像 1
    • Pull the case apart and you will be able to see all the components inside the speaker.

  8. Altec Lansing BoomJacket Speaker Replacement: 手順 8、 1の画像 1
    • Remove the speakers (not entirely because of the wiring) by gently pulling each speaker up.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

2人の作成者と共同で作成されました。

Ryan Byrnes

メンバー登録日: 04/12/17

872 ポイント

5のガイドは作成済み

チーム

2 件のコメント

Where do I find the correct part to replace the charging port on my boom jacket?

Rockstar - 返信

1.1" External Magnetic Type Round Slim Plastic Shell Speaker 8 Ohm 0.25W 2 Pcs

Eeshton -

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 6

今までの合計 739