修理を始めるには コミュニティ ストア

Alienware m15 R6 Rear-I/O cover Replacement

はじめに

Prerequisites

  1. Follow the procedure in Before working inside your computer.

必要な工具と部品

  1. Alienware m15 R6 Rear-I/O cover Replacement, Base Cover: 手順 1、 1の画像 1

    • Remove the two screws (M2.5x5) that secure the base cover to the palm-rest and keyboard assembly.

    • New line. Loosen the two captive screws (M2.5x8.5+3.5) that secure the base cover to the palm-rest and keyboard assembly

    • Loosen the four captive screws (M2.5x1.7+3.3) that secure the base cover to the palm-rest and keyboard assembly.

    編集

  2. Alienware m15 R6 Rear-I/O cover Replacement: 手順 2、 1の画像 1

    • Using your fingertips, pry open the base cover from the middle of the front edge of base cover, and then pry the left and right sides of the base cover.

    • Lift the base cover off the palm-rest and keyboard assembly.

    編集

  4. Alienware m15 R6 Rear-I/O cover Replacement: 手順 3、 1の画像 1

    • Disconnect the battery cable from the system board.

    • Turn your computer over and press the power button for 20 seconds to drain the flea power

    編集

  5. Alienware m15 R6 Rear-I/O cover Replacement, Rear-I/O cover: 手順 4、 1の画像 1

    • Remove the two screws (M2x4) that secure the rear I/O-cover to the palm-rest and keyboard assembly.

    • Remove the two screws (M2.5x5) that secure the rear I/O-cover to the palm-rest and keyboard assembly.

    • Disconnect the Tron light cable from the system board.

    • Firmly grasp the sides of your computer with both hands and push the rubber feet on the rear I/O-cover outwards with yourthumbs to release the rear I/O-cover from the palm-rest and keyboard assembly.

    • Slide the rear I/O-cover away from the palm-rest and keyboard assembly.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

1人の作成者と共同作成されました。

Andrzej

メンバー登録日: 02/17/23

1,672 ポイント

18のガイドは作成済み

バッジ: 12

+9 個以上のバッジ

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 5

今までの合計 120