修理を始めるには コミュニティ ストア

Alienware m15 R6 I/O board Replacement

はじめに

Prerequisites

  1. Follow the procedure in Before working inside your computer.

必要な工具と部品

  1. Alienware m15 R6 I/O board Replacement, Base Cover: 手順 1、 1の画像 1

    • Remove the two screws (M2.5x5) that secure the base cover to the palm-rest and keyboard assembly.

    • New line. Loosen the two captive screws (M2.5x8.5+3.5) that secure the base cover to the palm-rest and keyboard assembly

    • Loosen the four captive screws (M2.5x1.7+3.3) that secure the base cover to the palm-rest and keyboard assembly.

    編集

  2. Alienware m15 R6 I/O board Replacement: 手順 2、 1の画像 1

    • Using your fingertips, pry open the base cover from the middle of the front edge of base cover, and then pry the left and right sides of the base cover.

    • Lift the base cover off the palm-rest and keyboard assembly.

    編集

  4. Alienware m15 R6 I/O board Replacement: 手順 3、 1の画像 1

    • Disconnect the battery cable from the system board.

    • Turn your computer over and press the power button for 20 seconds to drain the flea power

    編集

  5. Alienware m15 R6 I/O board Replacement, I/O board: 手順 4、 1の画像 1

    • Lift the system board Mylar and open the latch to disconnect the I/O-board cable from the system board.

    • Open the latch to disconnect the I/O-board cable from the I/O board.

    • Remove the screw (M2x4) that secures the I/O board to the palm-rest and keyboard assembly.

    • Loosen the captive screw (M2x2) that secures the I/O board to the palm-rest and keyboard assembly. (skip for NVIDIA GeForce RTX 3050 Ti discrete GPU controller)

    • Lift the I/O board off the palm-rest and keyboard assembly.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

1人の作成者と共同作成されました。

Andrzej

メンバー登録日: 02/17/23

1,672 ポイント

18のガイドは作成済み

バッジ: 12

+9 個以上のバッジ

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 5

今までの合計 83