修理を始めるには コミュニティ ストア

Alienware m15 R6 Base Cover Replacement

はじめに

Prerequisites 1. Follow the procedure in Before working inside your computer.

About this task The following images indicate the location of the base cover and provide a visual representation of the removal procedure.

必要な工具と部品

  1. Alienware m15 R6 Base Cover Replacement, Base Cover: 手順 1、 1の画像 1

    • Remove the two screws (M2.5x5) that secure the base cover to the palm-rest and keyboard assembly.

    • New line. Loosen the two captive screws (M2.5x8.5+3.5) that secure the base cover to the palm-rest and keyboard assembly

    • Loosen the four captive screws (M2.5x1.7+3.3) that secure the base cover to the palm-rest and keyboard assembly.

    編集

  3. Alienware m15 R6 Base Cover Replacement: 手順 2、 1の画像 1

    • Using your fingertips, pry open the base cover from the middle of the front edge of base cover, and then pry the left and right sides of the base cover.

    • Lift the base cover off the palm-rest and keyboard assembly.

    編集

  4. Alienware m15 R6 Base Cover Replacement: 手順 3、 1の画像 1

    • Disconnect the battery cable from the system board.

    • Turn your computer over and press the power button for 20 seconds to drain the flea power

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

1人の作成者と共同作成されました。

Andrzej

メンバー登録日: 02/17/23

1,672 ポイント

18のガイドは作成済み

バッジ: 12

+9 個以上のバッジ

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 11

今までの合計 215