メインコンテンツにスキップ

はじめに

Is your computer not loading application properly? Consider using this guide to replace the RAM in your laptop.

パーツ

パーツは指定されていません。

  1. Please power off the computer and deplete the battery before attempting the following step.
    • Please power off the computer and deplete the battery before attempting the following step.

  2. Press down on the battery latch and slide it to the left. Lift the battery out once it pops out.
    • Press down on the battery latch and slide it to the left.

    • Lift the battery out once it pops out.

  3. Loosen the two silver Phillips #1 screws.
    • Loosen the two silver Phillips #1 screws.

    • The screws are held to the compartment door by a washer and cannot be removed.

  4. Use your hand to gently lift and remove the compartment door. Use your hand to gently lift and remove the compartment door.
    • Use your hand to gently lift and remove the compartment door.

  5. Remove the Phillips #1 screw holding the plate. Use your hand to remove the plate.
    • Remove the Phillips #1 screw holding the plate.

    • Use your hand to remove the plate.

    • The screw is held to the plate by a washer and cannot be removed.

  6. Pull the clips to the side away from each other. The RAM will pop up. Lift forward and gently loosen to pull out of socket.
    • Pull the clips to the side away from each other. The RAM will pop up.

    • Lift forward and gently loosen to pull out of socket.

  7. For the second RAM card use the opening tool to gently lift the RAM card forward.
    • For the second RAM card use the opening tool to gently lift the RAM card forward.

まとめ

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

Jose

メンバー登録日: 2018年09月19日

306 ポイント

3のガイドは作成済み

チーム

CSU Fullerton, Team S2-G2, Bruce Fall 2018 CSU Fullerton, Team S2-G2, Bruce Fall 2018人のメンバー

CSUF-BRUCE-F18S2G2

4 メンバー

8のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 3

過去 30 日: 15

今までの合計 152