メニュー

あなたの設定

私のワークベンチ

お持ちのデバイス用の修理ガイド、交換用パーツやアンサーフォーラムにアクセスする。
カート

カートには何も入っていません。

当社のショップを閲覧する

Alienware M17x P01E Keyboard Replacement

作成者： Grant Dolmat (そして 3 人のその他投稿者)
  • コメント: 0
  • お気に入り: 1
  • 完了: 1

難易度

普通

手順

8

所要時間

15 - 20 分

セクション

3

フラグ

0

はじめに

Are the keys not registering when you type? Consider using this guide to replace the keyboard in your laptop.

ツール

これらのツールを購入する

パーツ

パーツは指定されていません。

  1. Please power off the computer and deplete the battery before attempting the following step.

    • Please power off the computer and deplete the battery before attempting the following step.

    翻訳

  2. Press down on the battery latch and slide it to the left. Lift the battery out once it pops out.

    • Press down on the battery latch and slide it to the left.

    • Lift the battery out once it pops out.

    翻訳

  3. Remove the two 2mm Phillips #0 screws from the recesses on the left and right side of the processor fan. Remove the two 2mm Phillips #0 screws from the recesses on the left and right side of the processor fan. Remove the two 2mm Phillips #0 screws from the recesses on the left and right side of the processor fan.

    • Remove the two 2mm Phillips #0 screws from the recesses on the left and right side of the processor fan.

    翻訳

  5. Turn the laptop top side up and fully open the display. The center control panel is between the display and the keyboard. Fully opening the display ensures that there is enough room to pry and lift the center control panel.

    • Turn the laptop top side up and fully open the display.

    • The center control panel is between the display and the keyboard. Fully opening the display ensures that there is enough room to pry and lift the center control panel.

    • Pry the center control panel up from its left and right edges with the Spudger.

    • The center control panel may require a decent amount of force to pry free. Do not immediately lift the panel from the laptop once it has been pried free. A cable is connected from the laptop to the center control panel.

    翻訳

  6. Lift the center control panel from the laptop. Tilt the center control panel away from the display carefully.

    • Lift the center control panel from the laptop.

    • Tilt the center control panel away from the display carefully.

    • Lift the latch open to remove the cable connecting from the laptop to the center control panel.

    翻訳

  7. Remove the five 3mm Phillips #0 screws.

    • Remove the five 3mm Phillips #0 screws.

    翻訳

  8. There two cables connected from the underside of the keyboard to the laptop. Slide and lift the keyboard towards the display to unhook it from the laptop. Tilt the keyboard away from the display carefully.

    • There two cables connected from the underside of the keyboard to the laptop.

    • Slide and lift the keyboard towards the display to unhook it from the laptop.

    • Tilt the keyboard away from the display carefully.

    翻訳

  9. Flip open the two latches that connect the wide keyboard cable and thin light cable to the laptop. Lift the keyboard off the laptop and set aside.

    • Flip open the two latches that connect the wide keyboard cable and thin light cable to the laptop.

    • Lift the keyboard off the laptop and set aside.

    • Don't be alarmed if the cables are already disconnected. Simply lifting the keyboard from the laptop may cause the cables to disconnect because the latches require very little force to open.

    翻訳
まとめ

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

3他の投稿者と一緒に

Grant Dolmat

メンバー登録日: 2018年09月17日

328 ポイント

2のガイドは作成済み

バッジ: 5

+2 個以上のバッジ

チーム

CSU Fullerton, Team S2-G2, Bruce Fall 2018 CSU Fullerton, Team S2-G2, Bruce Fall 2018人のメンバー

CSUF-BRUCE-F18S2G2

4 メンバー

8のガイドは作成済み

0コメント

コメントを追加

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 4

過去 30 日: 17

今までの合計 216