はじめに

This guide will show you how to safely access and replace the RAM sticks for the Alienware M14xR2 laptop. In order to remove the RAM you need to first remove the battery and the CD drive.

パーツ

パーツは必要ありません。

Turn the computer off.
  • Turn the computer off.

  • Disconnect the charging cable from the computer.

  • Failure to unplug the charging cable could result in electric shock and serious injury.

  • Flip the computer upside down.

コメントを追加する

Loosen the two 6.35 mm size 1 Phillips screws on the back cover. The two screws are spring loaded and will not separate from the cover. Slide the back cover towards you and then  lift upwards to remove.
  • Loosen the two 6.35 mm size 1 Phillips screws on the back cover.

    • The two screws are spring loaded and will not separate from the cover.

  • Slide the back cover towards you and then lift upwards to remove.

コメントを追加する

Loosen the two 6.35 mm size 1 Philips screws attaching the battery to the laptop.
  • Loosen the two 6.35 mm size 1 Philips screws attaching the battery to the laptop.

  • The two screws are clipped into the battery and will not detach.

コメントを追加する

Pull up on the black tab on the battery to reveal the connection between the battery and laptop. Pull up on the white connector to disconnect it from the laptop. The battery is now free to remove from the laptop and can be set aside.
  • Pull up on the black tab on the battery to reveal the connection between the battery and laptop.

  • Pull up on the white connector to disconnect it from the laptop.

  • The battery is now free to remove from the laptop and can be set aside.

コメントを追加する

Unscrew the four 6.35 mm size 1 screws. Pull up on the end of the orange tab to detach it from the white connector. Lift the optical drive up and out of the laptop and set it aside.
  • Unscrew the four 6.35 mm size 1 screws.

  • Pull up on the end of the orange tab to detach it from the white connector.

  • Lift the optical drive up and out of the laptop and set it aside.

コメントを追加する

Unscrew the two 6.35 mm size 1 screws. Lift up and remove the panel covering the RAM sticks. Lift up and remove the panel covering the RAM sticks.
  • Unscrew the two 6.35 mm size 1 screws.

  • Lift up and remove the panel covering the RAM sticks.

コメントを追加する

Push outward on both prongs that secure the RAM sticks in place. The RAM sticks will rise upward when released from the prongs.
  • Push outward on both prongs that secure the RAM sticks in place.

  • The RAM sticks will rise upward when released from the prongs.

コメントを追加する

Grab and pull the RAM sticks up and out of their casing and set them aside. Grab and pull the RAM sticks up and out of their casing and set them aside.
  • Grab and pull the RAM sticks up and out of their casing and set them aside.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

3 の人々がこのガイドを完成させました。

Eugene Park

メンバー登録日: 2013年09月30日

180 ポイント

1ガイドが承認済み

チーム

Cal Poly, Team 13-4, Forte Fall 2013 Cal Poly, Team 13-4, Forte Fall 2013人のメンバー

CPSU-FORTE-F13S13G4

5 メンバー

5のガイドは作成済み

How max is the ram upgrade compatible with the m14x ifixit?!

doantuan85 - 返信

I meaned r1 model

doantuan85 - 返信

Yo, man! If my RAM slot is damaged somehow, is there any possibility to change/repair it? It won't detect a RAM card, keeps beeping 4 times at the start.

tasanov - 返信

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 11

今までの合計 1,447