メインコンテンツにスキップ

はじめに

how to remove and replace power button board

パーツ

パーツは指定されていません。

  1. WARNING: Before working inside your computer, read the safety information that shipped with your computer.
    • WARNING: Before working inside your computer, read the safety information that shipped with your computer.

    • CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

    • Remove the two screws that secure the power button board to the palm rest assembly.

  2. Lift the power button board off the palm rest assembly.
    • Lift the power button board off the palm rest assembly.

  3. Place the power button board on the palm rest assembly and replace the two screws that secure the power button board to the palm rest assembly.
    • Place the power button board on the palm rest assembly and replace the two screws that secure the power button board to the palm rest assembly.

    • CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage the computer.

まとめ

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

darrius

メンバー登録日: 2018年03月26日

5,072 ポイント

30のガイドは作成済み

チーム

Informative Technologies Inc. Informative Technologies Inc.人のメンバー

Community

15 メンバー

926のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 6

今までの合計 82