修理を始めるには コミュニティ ストア

Alienware 17 R2 Wireless Card Replacement

必要な工具と部品

  1. Alienware 17 R2 Wireless Card Replacement, Removing the Screw: 手順 1、 1の画像 1

    • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.

    • Remove the screw that secures the wireless-card bracket and the wireless card to the system board.

    翻訳

  2. Alienware 17 R2 Wireless Card Replacement, Lifting the Card Bracket: 手順 2、 1の画像 1

    • Lift the wireless-card bracket off the wireless card.

    翻訳

  3. Alienware 17 R2 Wireless Card Replacement, Disconnecting Antenna Cables: 手順 3、 1の画像 1

    • Disconnect the antenna cables from the wireless card.

    翻訳

  5. Alienware 17 R2 Wireless Card Replacement, Removing the Wireless Card: 手順 4、 1の画像 1

    • Lift and slide the wireless card from the wireless-card slot.

    翻訳

    • CAUTION: To avoid damaging the wireless card, do not place any cables under it.

    • Align the notch on the wireless card with the tab on the wireless-card slot.

    翻訳

  7. Alienware 17 R2 Wireless Card Replacement, Sliding the Wireless Card: 手順 6、 1の画像 1

    • Slide the wireless card at an angle into the wireless-card slot.

    翻訳

  8. Alienware 17 R2 Wireless Card Replacement, Connecting Cables to the Wireless Card: 手順 7、 1の画像 1

    • Connect the antenna cables to the wireless-card.

    • The following is the antenna-cable color color scheme for the wireless card: Main (white triangle) = White Auxiliary (black triangle) = Black

    翻訳

  9. Alienware 17 R2 Wireless Card Replacement, Aligining the Screw Holes: 手順 8、 1の画像 1

    • Align the screw hole on the wireless-card bracket with the screw hole on the wireless card.

    翻訳

  10. Alienware 17 R2 Wireless Card Replacement, Replacing the Screw: 手順 9、 1の画像 1

    • Replace the screw that secures the wireless-card bracket and the wireless card to the system board.

    翻訳
終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

2人の作成者と共同で作成されました。

Terrence15

メンバー登録日: 12/18/17

79,091 ポイント

441のガイドは作成済み

バッジ: 28

+25 個以上のバッジ

チーム

RampUP America, Inc. RampUP America, Inc.人のメンバー

Community

42 メンバー

1,985のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 1

過去 30 日: 4

今までの合計 717