メインコンテンツにスキップ

はじめに

In this guide, we will be showing you how to remove and replace the Base Panel.

パーツ

パーツは指定されていません。

  1. Close the display and turn the computer over.
    • Close the display and turn the computer over.

    • Make sure PC is turned off!

  2. Loosen the captive screws that secure the base panel to the computer base.
    • Loosen the captive screws that secure the base panel to the computer base.

  3. Using a plastic scribe, gently release the tabs that secure the base panel to the computer base.
    • Using a plastic scribe, gently release the tabs that secure the base panel to the computer base.

  4. Slide and remove the base panel from the computer base.
    • Slide and remove the base panel from the computer base.

  5. Disconnect the Battery cable from the system board.
    • Disconnect the Battery cable from the system board.

    • Turn the computer over.

    • Press and hold power button for 5 seconds to ground the system board.

  6. Connect the battery cable to the system board.
    • Connect the battery cable to the system board.

  7. Tighten the captive screws that secure the base panel to the computer base.
    • Tighten the captive screws that secure the base panel to the computer base.

終わりに

To reassemble your device, follow these instructions in reverse order.

Terrence15

メンバー登録日: 2017年12月18日

71,588 ポイント

442のガイドは作成済み

チーム

Informative Technologies Inc. Informative Technologies Inc.人のメンバー

Community

18 メンバー

1,810のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 2

過去 7 日: 4

過去 30 日: 22

今までの合計 320