メインコンテンツにスキップ
  1. Locate the small indent on the lower left corner. Use your fingers or a small plastic opening tool to lift the back cover off. Use your fingers or a small plastic opening tool to lift the back cover off.
    • Locate the small indent on the lower left corner.

    • Use your fingers or a small plastic opening tool to lift the back cover off.

  2. Locate the indent between the battery and your phone. Use your finger or a small plastic opening tool to lift the battery free. Use your finger or a small plastic opening tool to lift the battery free.
    • Locate the indent between the battery and your phone.

    • Use your finger or a small plastic opening tool to lift the battery free.

  3. Using the Phillips screw driver, remove the 9 screws from the phone. Using the Phillips screw driver, remove the 9 screws from the phone. Using the Phillips screw driver, remove the 9 screws from the phone.
    • Using the Phillips screw driver, remove the 9 screws from the phone.

  4. Using your prying tool, place it between the screen and the back cover and pry it open.
    • Using your prying tool, place it between the screen and the back cover and pry it open.

  5. Apple Watch キット

    Screen and battery repairs just got easier.

    ショップを見る

    Apple Watch キット

    Screen and battery repairs just got easier.

    ショップを見る
  6. Disconnect the camera from the mother board with your prying tool. Disconnect the camera from the mother board with your prying tool.
    • Disconnect the camera from the mother board with your prying tool.

  7. Remove both of this cables located on the bottom left corner of the phone. Remove both of this cables located on the bottom left corner of the phone. Remove both of this cables located on the bottom left corner of the phone.
    • Remove both of this cables located on the bottom left corner of the phone.

  8. Remove the volume and power button using your prying tool. Go underneath the bronze plate with your prying tool and carefully pry it off.
    • Remove the volume and power button using your prying tool.

    • Go underneath the bronze plate with your prying tool and carefully pry it off.

  9. Remove this pice that is to the right of the camera with your prying tool.
    • Remove this pice that is to the right of the camera with your prying tool.

  10. Remove this two pieces by using your tweezers. Carefully pull them off. There will be a black flap where you can place your tweezers to pull.
    • Remove this two pieces by using your tweezers.

    • Carefully pull them off. There will be a black flap where you can place your tweezers to pull.

  11. Using you prying tool, go in-between the phone.
    • Using you prying tool, go in-between the phone.

    • Carefully pry it off.

まとめ

To reassemble your device, follow these instructions in reverse order.

Yahriel Negrete

メンバー登録日: 2018年02月08日

291 ポイント

2のガイドは作成済み

チーム

University of North Texas, Team S6-G3, Thomas Spring 2018 University of North Texas, Team S6-G3, Thomas Spring 2018人のメンバー

UNT-THOMAS-S18S6G3

4 メンバー

5のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 4

今までの合計 111