メインコンテンツにスキップ

Air Hog Smash Bots Radio Receiver Replacement

必要な工具と部品

  1. Air Hog Smash Bots Radio Receiver Replacement, Batteries: 手順 1、 1の画像 1
    • Using the Phillips #0 screwdriver to remove the 8 mm screw.

  2. Air Hog Smash Bots Radio Receiver Replacement: 手順 2、 1の画像 1
    • Lift and slide the batter cover away from the tab holding it in place at the bottom.

  3. Air Hog Smash Bots Radio Receiver Replacement: 手順 3、 1の画像 1
    • Remove the 3 AAA batteries.

  4. Air Hog Smash Bots Radio Receiver Replacement, External Casing: 手順 4、 2の画像 1 Air Hog Smash Bots Radio Receiver Replacement, External Casing: 手順 4、 2の画像 2
    • Using a Phillip #0 screwdriver to remove the eight 8 mm screws.

  5. Air Hog Smash Bots Radio Receiver Replacement: 手順 5、 2の画像 1 Air Hog Smash Bots Radio Receiver Replacement: 手順 5、 2の画像 2
    • Remove the upper armor of the Smash Bot.

  6. Air Hog Smash Bots Radio Receiver Replacement: 手順 6、 1の画像 1
    • Hold the upper body and slide out the bottom half of the Smash Bot.

    • The motor extends from the lower-body into the upper-body. Be careful to not damage the motor.

  7. Air Hog Smash Bots Radio Receiver Replacement: 手順 7、 1の画像 1
    • Peel back the four decal stickers that hold the front and back of the bot together.

  8. Air Hog Smash Bots Radio Receiver Replacement: 手順 8、 2の画像 1 Air Hog Smash Bots Radio Receiver Replacement: 手順 8、 2の画像 2
    • Use the plastic opening tool to pry the front and back of the lower body apart.

    • Carefully remove the back of the bot from the front.

  9. Air Hog Smash Bots Radio Receiver Replacement, Radio Receiver: 手順 9、 2の画像 1 Air Hog Smash Bots Radio Receiver Replacement, Radio Receiver: 手順 9、 2の画像 2
    • Use the Phillips 0 screwdriver to remove two 4.75mm screws.

  10. Air Hog Smash Bots Radio Receiver Replacement: 手順 10、 2の画像 1 Air Hog Smash Bots Radio Receiver Replacement: 手順 10、 2の画像 2
    • Use the soldering workstation to remove the five wires. Directions on how to solder can be found here.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

2人の作成者と共同で作成されました。

Brittany Frecker

メンバー登録日: 02/08/16

542 ポイント

4のガイドは作成済み

チーム

IUPUI, Team 1-1, Baechle Spring 2016 IUPUI, Team 1-1, Baechle Spring 2016人のメンバー

IUPUI-BAECHLE-S16S1G1

4 メンバー

14のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 2

今までの合計 274