メインコンテンツにスキップ

パーツ

パーツは指定されていません。

  1. Remove the battery cover. Remove the batteries. Remove the batteries.
    • Remove the battery cover.

    • Remove the batteries.

  2. Unscrew the three 4mm screws from the battery side of the device. Use a Phillips screw driver.
    • Unscrew the three 4mm screws from the battery side of the device. Use a Phillips screw driver.

  3. Remove the four screws from the back side.
    • Remove the four screws from the back side.

  4. Remove the sticky black dot. Remove the hidden screw.
    • Remove the sticky black dot.

    • Remove the hidden screw.

  5. Remove the two screws from the top side of the device. Remove the two screws from the bottom side of the device.
    • Remove the two screws from the top side of the device.

    • Remove the two screws from the bottom side of the device.

  6. Android 修理キット

    交換用スクリーンやバッテリーの修理キット

    ショップを見る

    Android 修理キット

    交換用スクリーンやバッテリーの修理キット

    ショップを見る
  7. Remove the rear cover.
    • Remove the rear cover.

    • Be careful not to lose the spring inside.

  8. Pull back the front cover so that you can dislodge the side cover.
    • Pull back the front cover so that you can dislodge the side cover.

  9. Unfold the device and be careful not to tear the black and red power supply wires.
    • Unfold the device and be careful not to tear the black and red power supply wires.

  10. Remove the four screws from the motherboard.
    • Remove the four screws from the motherboard.

  11. Take out the motherboard while disconnecting the flip screen's cable from underneath.
    • Take out the motherboard while disconnecting the flip screen's cable from underneath.

  12. Remove the side cover.
    • Remove the side cover.

    • Flip the device and locate the ejecting assembly.

  13. Remove the grey button.
    • Remove the grey button.

  14. Push the metal arm the button was on all the way up.
    • Push the metal arm the button was on all the way up.

  15. Pop the main metal arm out of the other metal arm's socket. Position the arm vertically like in the first picture. The arm should come off easily.
    • Pop the main metal arm out of the other metal arm's socket.

    • Position the arm vertically like in the first picture. The arm should come off easily.

    • Replace the ejecting arm.

まとめ

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Gyozo Aba Hivatal

メンバー登録日: 2015年01月21日

549 ポイント

5のガイドは作成済み

チーム

USF Tampa, Team 6-4, Brown Winter 2015 USF Tampa, Team 6-4, Brown Winter 2015人のメンバー

USFT-BROWN-W15S6G4

3 メンバー

5のガイドは作成済み

0 件のコメント

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 61