メインコンテンツにスキップ

Aerogarden Air Pump Replacement

ビデオの概要

  1. Aerogarden Air Pump Replacement, Aerogarden Air Pump: 手順 1、 2の画像 1 Aerogarden Air Pump Replacement, Aerogarden Air Pump: 手順 1、 2の画像 2
    • Remove the water and seed pod container and set it aside.

  2. Aerogarden Air Pump Replacement: 手順 2、 2の画像 1 Aerogarden Air Pump Replacement: 手順 2、 2の画像 2
    • Peel back the footpads at the bottom.

    • Unscrew the eight screws on the bottom to remove the base

  3. Aerogarden Air Pump Replacement: 手順 3、 2の画像 1 Aerogarden Air Pump Replacement: 手順 3、 2の画像 2
    • Disconnect the wires for the lights so the base can be fully opened.

  4. Aerogarden Air Pump Replacement: 手順 4、 2の画像 1 Aerogarden Air Pump Replacement: 手順 4、 2の画像 2
    • Remove the four screws holding the pump down

  5. Aerogarden Air Pump Replacement: 手順 5、 2の画像 1 Aerogarden Air Pump Replacement: 手順 5、 2の画像 2
    • Cut the wires as close to the pump as possible, to preserve their length. The wire connections are covered with glue

    • Strip the plastic from about 1/8 inch of the wire ends.

    • On the circuit board, note which wire is positive, and which wire is negative.

  6. Aerogarden Air Pump Replacement: 手順 6、 2の画像 1 Aerogarden Air Pump Replacement: 手順 6、 2の画像 2
    • Connect the wires to the new pump and solder them in or affix them with heat shrink tubing for wires. Well, the solder should be covered with the heat shrink tubing, as well, since it is a potentially wet environment.

  7. Aerogarden Air Pump Replacement: 手順 7、 3の画像 1 Aerogarden Air Pump Replacement: 手順 7、 3の画像 2 Aerogarden Air Pump Replacement: 手順 7、 3の画像 3
    • Assemble in reverse order.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

2人の作成者と共同で作成されました。

Jameslimon

メンバー登録日: 03/20/24

145 ポイント

1ガイドが承認済み

チーム

CSU Los Angeles, Team 1-59, Harris Spring 2024 CSU Los Angeles, Team 1-59, Harris Spring 2024人のメンバー

CSULA-HARRIS-S24S1G59

2 メンバー

1のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 2

過去 7 日: 8

過去 30 日: 19

今までの合計 46