Acer Nitro 5 AN515-55-56GN HDD Replacement

はじめに

This guide will show you how to replace or install an HDD for your Acer Nitro 5 AN515-55-56GN.

Before opening and updating the laptop, it is important to sync the necessary files to the cloud or storage in order to back up data to avoid losing it. Additionally, prior to beginning this repair or upgrade, power off your device and physically unplug your laptop, don't just switch it off.

HDD is used for traditional storage devices that read and write data.

The purpose of installing the HDD (Hard Disk Drive) is to gain additional storage space, especially during the pandemic, when people have to work from home and use a laptop more frequently than usual.

必要な工具と部品

手順1 HDD

Acer Nitro 5 AN515-55-56GN HDD Replacement, HDD: 手順 1、 3の画像 1

Acer Nitro 5 AN515-55-56GN HDD Replacement, HDD: 手順 1、 3の画像 2

Acer Nitro 5 AN515-55-56GN HDD Replacement, HDD: 手順 1、 3の画像 3

Turn off the laptop and unplug it from the charging cord.
Flip the laptop over so the backside is facing up.
Use a Phillips #0 screwdriver to remove ten 9 mm screws.

編集

手順2

Acer Nitro 5 AN515-55-56GN HDD Replacement: 手順 2、 3の画像 3

Use your fingers or an opening tool to remove the back case by separating it at the seam.
Work your way gently around the perimeter to undo the clips.
Remove the back case.

編集

手順3

Acer Nitro 5 AN515-55-56GN HDD Replacement: 手順 3、 3の画像 3

Unplug the battery cable from the connector attaching the battery to the motherboard.
Make sure that the laptop battery is unplugged or remove the battery before installing the HDD.

編集

手順4

Acer Nitro 5 AN515-55-56GN HDD Replacement: 手順 4、 3の画像 3

Use the Phillips #0 screwdriver to remove four 3 mm screws from the hard drive bracket.
Remove the bracket from the device.

編集

手順5

Acer Nitro 5 AN515-55-56GN HDD Replacement: 手順 5、 3の画像 3

Place the HDD 1TB in the bracket.
Use the Phillips #0 screwdriver to secure the 2 mm screws that hold the HDD in the bracket.
The 2 mm screws are included with the new HDD.