Acer Iconia B1-710 Tablet Camera Replacement

はじめに

This guide will provide a set of step-by-step instructions on how to remove and replace the camera on your Acer Iconia B1-710 tablet.

In the event that your camera scratches, breaks, or malfunctions, this guide can help assist you to remove and replace the camera on your Acer Iconia B1-710 tablet.

Be careful, this is a fragile device.

必要な工具と部品

手順1 Battery

Acer Iconia B1-710 Tablet Camera Replacement, Battery: 手順 1、 3の画像 1

Acer Iconia B1-710 Tablet Camera Replacement, Battery: 手順 1、 3の画像 2

Acer Iconia B1-710 Tablet Camera Replacement, Battery: 手順 1、 3の画像 3

Open the back cover by prying the casing off with an opening tool.
Be careful to not pull pieces apart aggressively. There is a wire that could break.

編集

手順2

Acer Iconia B1-710 Tablet Camera Replacement: 手順 2、 3の画像 3

Unplug the battery from the motherboard.

編集

手順3

Remove the battery.
The battery is lightly glued in, so there may be some difficulty getting it out.

編集

手順4 Camera

Acer Iconia B1-710 Tablet Camera Replacement, Camera: 手順 4、 2の画像 1

Acer Iconia B1-710 Tablet Camera Replacement, Camera: 手順 4、 2の画像 2

Remove the five 3mm Phillips #000 screws. The location of the screws are shown in the above picture, circled in red.
Keep the removed screws in a safe place so they can be used later.

編集

手順5

Unplug the LCD by lifting the LCD plug from the white board. The location of the LCD plug is shown in the above picture, circled in red.
If you are having difficulty removing the LCD plug, use a spudger to gently lift it.

編集

手順6

Next, unplug the orange strip from the motherboard by gently lifting it. The location of the orange strip is shown in the above picture, circled in red.
The orange strip is delicate; be careful when unplugging it and make sure it doesn't tear.

編集