メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

はじめに

This guide is useful for helping to troubleshoot or replace the Acer Chromebook Spin 15 CP315-1H-P1K8 touchpad. If the touchpad on your laptop is no longer responsive or no longer functioning, use this guide to remove and replace the touchpad.

  1. Make sure the device is fully powered off. Flip the computer over so that the back is facing up.
    • Make sure the device is fully powered off.

    • Flip the computer over so that the back is facing up.

    • Remove the twelve 6mm Phillips #1 screws from the bottom of the laptop.

  2. Use the iFixit opening tools as wedges to pry the back of the laptop off. Go slow, making sure not to snap the plastic. With enough of a gap made, you can use your hand to finish taking off the back. Go slow, making sure not to snap the plastic. With enough of a gap made, you can use your hand to finish taking off the back.
    • Use the iFixit opening tools as wedges to pry the back of the laptop off.

    • Go slow, making sure not to snap the plastic. With enough of a gap made, you can use your hand to finish taking off the back.

  3. Remove the ribbon cable by pulling the plastic connector that is connected to the motherboard out. Remove the ribbon cable by pulling the plastic connector that is connected to the motherboard out. Remove the ribbon cable by pulling the plastic connector that is connected to the motherboard out.
    • Remove the ribbon cable by pulling the plastic connector that is connected to the motherboard out.

  4. 全てのタブを開く

    Mac用RAMアップグレードキット

    キット商品を見る

    どれだけタブを開いても
    十分に足りるRAM容量

    キット商品を見る
  5. Remove the battery from the laptop by hand.
    • Remove the battery from the laptop by hand.

  6. Detach the ribbon cable from the touchpad.
    • Detach the ribbon cable from the touchpad.

  7. Remove the tan adhesive tape that is covering the touchpad to expose the screws holding it in. Remove the three, 3mm long screws that are holding the touchpad in place.
    • Remove the tan adhesive tape that is covering the touchpad to expose the screws holding it in.

    • Remove the three, 3mm long screws that are holding the touchpad in place.

  8. Gently push the touchpad out with your hand. Gently push the touchpad out with your hand.
    • Gently push the touchpad out with your hand.

終わりに

To reassemble your device, follow these instructions in reverse order.

Evan Costa

メンバー登録日: 2019年10月29日

458 ポイント

3のガイドは作成済み

チーム

UMass Dartmouth, Team S4-G1, Saloman Fall 2019 UMass Dartmouth, Team S4-G1, Saloman Fall 2019人のメンバー

UMASSD-SALOMAN-F19S4G1

3 メンバー

5のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 2

過去 7 日: 2

過去 30 日: 11

今までの合計 148