メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

はじめに

In this replacement guide, you will learn how to safely remove and install a cooling fan.

  1. Flip your Chromebook over so the bottom is facing up.
    • Flip your Chromebook over so the bottom is facing up.

  2. Locate the 6 mm Phillips #00 screw that holds the back cover together. Use your driver with the PH00 bit attached to unscrew it. Once completely unscrewed, carefully lift the cover off.
    • Locate the 6 mm Phillips #00 screw that holds the back cover together. Use your driver with the PH00 bit attached to unscrew it.

    • Once completely unscrewed, carefully lift the cover off.

    • Place the cover and screw safely to the side for now.

  3. The Essential Toolkit

    コンパクト版iFixitキットの中で最も利便性の高いツール

    ショップを見る

    The Essential Toolkit

    コンパクト版iFixitキットの中で最も利便性の高いツール

    ショップを見る
  4. Now take your anti-static wrist strap and place it tightly on your wrist. Attach the alligator clamp of the wrist strap to something that will ground yourself to avoid possible electric zaps.
    • Now take your anti-static wrist strap and place it tightly on your wrist.

    • Attach the alligator clamp of the wrist strap to something that will ground yourself to avoid possible electric zaps.

    • The location chosen in the picture is recommended.

  5. Locate the two 6 mm Phillips #00 screws on the fan port. Unscrew the two screws and place them aside for now.
    • Locate the two 6 mm Phillips #00 screws on the fan port.

    • Unscrew the two screws and place them aside for now.

  6. Carefully remove the fan from its port. You may need to use a little force as there will be an adhesive on the right side of the fan keeping it in place. Locate the Molex cable connecting the fan to its port in the top left corner.
    • Carefully remove the fan from its port. You may need to use a little force as there will be an adhesive on the right side of the fan keeping it in place.

    • Locate the Molex cable connecting the fan to its port in the top left corner.

    • Disconnect the cable.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Nicholas Latorre

メンバー登録日: 2017年09月28日

555 ポイント

5のガイドは作成済み

チーム

USF Tampa, Team S1-G6, Nance Fall 2017 USF Tampa, Team S1-G6, Nance Fall 2017人のメンバー

USFT-NANCE-F17S1G6

4 メンバー

10のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 6

過去 30 日: 29

今までの合計 439