メインコンテンツにスキップ

はじめに

If your hard drive is full, your looking to upgrade, or your previous one is broken, this guide will help you to replace the old hard drive with a new one.

Warning: Static electric shocks may damage a good hard drive, or other components in the laptop. Ground yourself to the laptop by touching any metal interior part, besides electrical connections, or wear an anti-static device (preferred) before removing or adding computer parts.

パーツ

パーツは指定されていません。

  1. Shut down the laptop. Remove the power charging cord from the laptop
    • Shut down the laptop.

    • Remove the power charging cord from the laptop

  2. Flip the laptop over, and find the battery compartment. Use the screwdriver to move the orange slider located just below the battery compartment to the right. Do not touch the battery connectors on the battery or laptop.
    • Flip the laptop over, and find the battery compartment.

    • Use the screwdriver to move the orange slider located just below the battery compartment to the right.

    • Do not touch the battery connectors on the battery or laptop.

    • Lift the battery up and remove from the compartment.

  3. iPhoneのバッテリーキット

    Only $29.99

    Buy Now

    iPhoneのバッテリーキット

    Only $29.99

    Buy Now
  4. Locate the T-shaped panel on the back of the laptop. Using the screwdriver, remove the 9 screws in this panel. Screw size: 5.5X8mm
    • Locate the T-shaped panel on the back of the laptop.

    • Using the screwdriver, remove the 9 screws in this panel. Screw size: 5.5X8mm

    • Gently lift the panel up from the open slot, use the opening tools as necessary, to free the panel from the laptop.

  5. Locate the main hard drive compartment on the bottom left side of the laptop. Remove the two screws holding the hard drive sled in place. While grounding yourself, gently pull the black tag straight back, not up, to free the hard drive.
    • Locate the main hard drive compartment on the bottom left side of the laptop.

    • Remove the two screws holding the hard drive sled in place.

    • While grounding yourself, gently pull the black tag straight back, not up, to free the hard drive.

  6. Locate the four screws holding the hard drive to the sled. Screw Size: 2X4mm Using the screwdriver, remove the four screws. Carefully remove the hard drive. A new one may now be installed.
    • Locate the four screws holding the hard drive to the sled. Screw Size: 2X4mm

    • Using the screwdriver, remove the four screws.

    • Carefully remove the hard drive. A new one may now be installed.

まとめ

To reassemble your device, follow these instructions in reverse order.

5 の人々がこのガイドを完成させました。

David Walker

メンバー登録日: 2014年10月11日

245 ポイント

1ガイドが承認済み

チーム

USF Tampa, Team 1-36, Donnelly Fall 2014 USF Tampa, Team 1-36, Donnelly Fall 2014人のメンバー

USFT-DONNELLY-F14S1G36

1 メンバー

1のガイドは作成済み

コメント1件

Please pardon my inquiry. Is the same replacement can be done to Acer Aspire V3-572P-540V? Any reply will be appreciated.

b6789b - 返信

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 16

過去 30 日: 97

今までの合計 8,536