はじめに

Removing the keyboard may take a some effort and a little bit of patience, but you can do it!

  1. Locate and remove the two 5.3 mm Phillips #1 screws holding the back panel in place.
    • Locate and remove the two 5.3 mm Phillips #1 screws holding the back panel in place.

    コメントを追加する

  2. Use a spudger to pry the panel up from the laptop case and remove it.
    • Use a spudger to pry the panel up from the laptop case and remove it.

    • The laptop should now be open with the RAM and wifi chip now accessible.

    コメントを追加する

    • Locate the wifi chip.

    コメントを追加する

    • Remove the 5 mm Phillips #1 screw holding the wifi chip in place.

    • Carefully remove the wifi chip.

    コメントを追加する

    • Remove the 8, 9 mm Phillips #1 screws holding the panel in place.

    コメントを追加する

    • Flip the computer over, and with a spudger, remove the black panel directly below the keyboard.

    • Remove the panel and flip it up onto the keyboard

    コメントを追加する

    • With the panel removed, locate the USB port ribbon cable connecting to the motherboard.

    • Carefully disconnect the ribbon cable.

    コメントを追加する

    • Unscrew the 5 mm Phillips #1 screw holding the USB ports in place.

    コメントを追加する

    • The USB ports can now be removed from the laptop.

    コメントを追加する

    • Flip the laptop and remove all 10 of the remaining 9mm screws from the back.

    I had to remove 11 screws. The one underneath the battery.

    sj.408.shane - 返信

    • Use a spudger to gently lift the keyboard.

    The photos for Step 11 show the USB ports still in place. Why did you remove them in Step 9 if it wasn't necessary?

    richmaru - 返信

まとめ

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

Alexander Lazar

メンバー登録日: 2014年04月22日

324 ポイント

2のガイドは作成済み

チーム

Cal Poly, Team 8-8, Regan Spring 2014 Cal Poly, Team 8-8, Regan Spring 2014人のメンバー

CPSU-REGAN-S14S8G8

4 メンバー

7のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 1

過去 7 日: 15

過去 30 日: 51

今までの合計 5,065