メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

はじめに

Speakers are a common point of failure for the Acer Aspire R7. If your audio sounds distorted, tinny, or isn't playing at all, consider replacing your speakers following this guide. Be very careful not to damage the speaker cable connections when disassembling the device.

パーツ

パーツは指定されていません。

  1. Turn off the laptop and disconnect the power adapter before attempting this guide. Failure to do so can result in a shock hazard.
    • Turn off the laptop and disconnect the power adapter before attempting this guide. Failure to do so can result in a shock hazard.

  2. Remove the top and middle grips that conceal 3 additional screws. Remove the (8) 10mm T9 screws. Remove the (5) 6mm T9 screws.
    • Remove the top and middle grips that conceal 3 additional screws.

    • Remove the (8) 10mm T9 screws.

    • Remove the (5) 6mm T9 screws.

  3. Remove back panel.
    • Remove back panel.

  4. Unscrew the (2) 3mm Philips #0 wide head screws. Carefully disconnect the speaker connection. Remove the speaker.
    • Unscrew the (2) 3mm Philips #0 wide head screws.

    • Carefully disconnect the speaker connection.

    • Remove the speaker.

  5. Disconnect the speaker from the main board. Unscrew the (2) 3mm Philips #0 wide head screws. Remove the speaker.
    • Disconnect the speaker from the main board.

    • Unscrew the (2) 3mm Philips #0 wide head screws.

    • Remove the speaker.

終わりに

To reassemble your device, follow these instructions in reverse order.

Evan Casey

メンバー登録日: 2018年09月10日

300 ポイント

2のガイドは作成済み

チーム

Appalachian State University, Team S2-G5, Menagarishvili Fall 2018 Appalachian State University, Team S2-G5, Menagarishvili Fall 2018人のメンバー

APSU-MENAGARISHVILI-F18S2G5

3 メンバー

5のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 3

今までの合計 130