メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

はじめに

The Hard Drive is internal, and requires some disassembly to replace. Make sure you have a way to keep all of the screws you'll be taking out sorted, and be careful with the internal parts of the computer -- they can be fragile!

  1. Turn off the laptop and disconnect the power adapter before attempting this guide. Failure to do so can result in a shock hazard.
    • Turn off the laptop and disconnect the power adapter before attempting this guide. Failure to do so can result in a shock hazard.

  2. Remove the top and middle grips that conceal 3 additional screws. Remove the 5 6mm T9 screws. Remove the 8 10mm T9 screws.
    • Remove the top and middle grips that conceal 3 additional screws.

    • Remove the 5 6mm T9 screws.

    • Remove the 8 10mm T9 screws.

  3. Remove the back cover.
    • Remove the back cover.

  4. Unscrew the four 4mm PH0 screws holding the hard drive in place. Unscrew the four 4mm PH0 screws holding the hard drive in place. Unscrew the four 4mm PH0 screws holding the hard drive in place.
    • Unscrew the four 4mm PH0 screws holding the hard drive in place.

  5. Tilt the hard drive up and pull it away and out of its base.
    • Tilt the hard drive up and pull it away and out of its base.

    • Do not use too much force on the hard drive or tilt it so much that the base is broken.

終わりに

To reassemble your device, follow these instructions in reverse order.

Daniel Dempsey

メンバー登録日: 2018年09月10日

177 ポイント

1ガイドが承認済み

チーム

Appalachian State University, Team S2-G5, Menagarishvili Fall 2018 Appalachian State University, Team S2-G5, Menagarishvili Fall 2018人のメンバー

APSU-MENAGARISHVILI-F18S2G5

3 メンバー

5のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 1

過去 7 日: 3

過去 30 日: 30

今までの合計 442