メインコンテンツにスキップ

はじめに

Guide on switching out the ram on the Acer Aspire E5-573G. Useful for replacing faulty ram, adding a new stick of ram, or upgrading RAM.

  1. Unscrew the single (5mm) Philips head screw holding the drive in place.
    • Unscrew the single (5mm) Philips head screw holding the drive in place.

  2. Pull out the optical drive.
    • Pull out the optical drive.

  3. Unscrew all 17 (5mm) Philips head screws from the bottom. Unscrew the 3 (2.5mm) Philips head screws underneath the optical drive.
    • Unscrew all 17 (5mm) Philips head screws from the bottom.

    • Unscrew the 3 (2.5mm) Philips head screws underneath the optical drive.

  4. Run a pick around the edge of the laptop (between the two parts) to open it. Lift the left side of the case up and unplug the speaker cable before fully taking the bottom off.
    • Run a pick around the edge of the laptop (between the two parts) to open it.

    • Lift the left side of the case up and unplug the speaker cable before fully taking the bottom off.

  5. Release the two holding pins. Pull out the ram.
    • Release the two holding pins.

    • Pull out the ram.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Alex Bahm

メンバー登録日: 2018年01月18日

1,538 ポイント

6のガイドは作成済み

チーム

Cal Poly, Team S12-G5, Banghart Winter 2018 Cal Poly, Team S12-G5, Banghart Winter 2018人のメンバー

CPSU-BANGHART-W18S12G5

3 メンバー

13のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 2

過去 7 日: 11

過去 30 日: 51

今までの合計 919